*take nothing for granted!
Unless otherwise indicated all photos © Richard McKie 2005 - 2015

Who is Online

We have 107 guests and no members online

Translate to another language

Electricity storage


The problem with wind and solar to an even greater extent is seasonal, daily, and hourly variability.  Electricity demand is also variable but in a far more predictable way; again seasonally, daily and hourly. These demand and supply peaks and troughs hardly ever match.  In particular winter demand peaks in southern latitudes occur when solar incidence is low or non-existent.  Wind does blow at night but often when demand is very low.

I have explained (in Renewable Electricity, elsewhere on this website) that even in the best wind provinces it is available for generation for only about a third of the time and that this limits the practical contribution that wind can make to total generation to around 30%.  This capacity factor limits solar to much less as it is dark for half the time and overcast or raining for another proportion. 

Let's take a real example: unlike much of Australia wind resources are of a very high quality in parts of South Australia and Tasmania. This has encouraged a great deal of wind investment there.  In 2016 in South Australia (just 5% of the national electricity market) wind generation reached 4,292 GWh, from over 700 installed turbines with a combined capacity of 1.6 GW of wind generation. 

As expected, a simple calculation based on hours in a year gives us an average capacity factor of 31%. The remainder of the time the State was dependent on other sources of electricity. In this case, fossil fuels and two interlinks to the neighbouring State of Victoria allowing the wind farms to dispose of unwanted energy when local demand is low and for consumers to get power from interstate when there is no wind.  Nevertheless this swap was in the wind generator's commercial interest as the farms produced 33% of the State's generation, the surplus, that enjoyed a substantial financial subsidy, being exported.

But fluctuations in the wind; high air-conditioning demand; and major storms, together with the closure of base load fossil generation; and the limitations of the interlink, resulted in serious blackouts.

As I previously discussed, an effective, efficient and low capital means of energy storage could dramatically change this. But it needs to be on a very large scale. You can easily see that to move to 90% wind power in South Australia first they would need another 1400 turbines and then a means of storing two thirds of their energy for when the wind is not blowing: 8.6 terawatt hours (TWh).

The intrinsic cost of wind energy, when not subsidised by means of large-scale generation certificates (LGCs), is already very much higher than the present alternative fossil-based sources, as demonstrated by the price difference between South Australia (33% wind, 60% fossil) and Queensland (0.05% wind, 94% fossil) in the following table.

 National Electricity Market





 Price maximum (A$/MWh)





 Price Minimum





 Approximate median





 LGC price (current wind subsidy - $ per MWh)





 Annual generation 2014-15 (TWh) 13 56.5 64.3 68.2
Electricity market situation in March 2017 (prior to closure of Victoria's major fossil based generation plant)
Note that Qld is considerably less populous than NSW but exports its cheaper electricity to the larger State
Sources: Office of the Chief Economist; NEM data dashboard; LGC closing rates 20/3/17


Given this high cost of wind generated electricity, the additional cost of any electricity storage would need to be trivial to avoid totally uneconomic electricity price increases.  South Australian electricity distributors already pay four to five times the national average for their wholesale electricity.

Due to falling panel costs and improved efficiency, photovoltaic (PV) solar generation may now be cheaper per kWh than wind. But the lower capacity factor and rapid fluctuations in output when it is cloudy require even higher levels of storage to make solar competitive as a total energy solution (see Why buy electricity when you can make your own? above). Any storage solution like batteries needs to be highly distributed to be sufficiently responsive; ideally connected and matched to particular photovoltaic solar panels.

Indeed many off-grid PV solar and wind installations use batteries.  So why not use them to allow more wind and solar for the grid in general?


Convert to batteries




Batteries store electricity by converting it to chemical energy and then back.  An ideal battery would store electricity with no losses, for example heat being generated during charging or discharge. It would be constructed from plentiful; non-toxic chemicals; and would be light weight to enable its use in vehicles and hand held devices. It would work in any climate and safely store chemical energy at a similar density to high explosives like TNT.   As in any battery the chemical reaction must be reversible. This should be possible many thousands of times over, before the storage qualities are significantly degraded, because a thousand cycles is only three years of daily use.  And recharging should be as fast as possible - certainly no more than the discharge time.

The National Energy Market table, above, illustrates that a low cost storage solution such as batteries would quickly pay for itself by buying electricity at $50 /MWh and reselling it at around $300/MWh (or in South Australia up to $2,500/MWh).

Such a low cost storage solution could be expected to quickly proliferate until this price differential fell to below the investment cost.  Although any investor might do this today 'the fly in the ointment' is that batteries are still too expensive to install and maintain - particularly after energy losses, replacement costs and maintaining the required electronic and electrical controls are taken into account.

Since I first wrote about batteries here, significant advances have been made in battery technology and these have been quickly commercialised. Sometimes too quickly, resulting in fiery mobile phones and damaged aircraft. 

For more than a century our best rechargeable battery was the lead-acid accumulator, like that in your conventional car; truck; or buss. Then, at last, in the last decade of the 20th century, new materials based on rare-earths offered new avenues of research.  Commercial nickel metal-hydride (NiMH) batteries, that met many of the desired criteria, became a reality.  Nickel is less dense than lead and the new batteries packed twice as much energy per kilogram as lead-acid cells.  As an added bonus they could be small or large and had no messy liquid acid or fumes. This improvement opened the way to many new types of hand tools and electric vehicles.  

For many years lithium shimmered as the 'Holy Grail' of battery technology. Lithium is the lightest metal and the least dense solid element. It's also highly reactive, with the greatest electrochemical potential and energy-to-weight ratio of any element in the periodic table. 

But lithium metal is so reactive that it spontaneously bursts into flame and early attempts to build a safe and practical battery ended in tears.  Nevertheless work went on, involving many improvements until, in 1985, Akira Yoshino assembled the first practical rechargeable lithium-ion battery at the Kawasaki Laboratory of the Asahi Kasei Corp in Japan.  His new battery avoided using lithium metal directly, making it less unstable, yet provided another doubling in energy density over NiMH.

With volume, the battery prices quickly fell, so that new opportunities and markets, like little drones and more complex telephones, proliferated.  The trouble is that Li-ion batteries are still rather dangerous. Higher current energy density comes with a risk, as Boeing discovered on their new 787; as did UPS when a battery fire brought one of their planes down.  Samsung too had to withdraw their Samsung Galaxy Note 7 recently due to higher density batteries catching fire. Further increase in energy density is likely to make them even more dangerous. 

Among these new markets for batteries are various types of electric vehicles. 


Hybrid car


The electric car maker Tesla is well aware of the dangers inherent in the lithium-ion (Li-ion) batteries it uses.  At the present time a Tesla P100D can get a third of the way from Sydney to Brisbane carrying an 85 kWh lithium-ion battery weighing 544 kg (around half a ton).  To obviate the risk of fire or explosion the Tesla 'battery' is not a single unit but consists of 7104 small individual Li-ion cells organised in 16 modules, separated across a wide pan below the car. 

It would be nice to drive all the way to Brisbane without a lengthy recharging stop. But the risk would be significantly magnified if the battery had four times the present energy density, let alone the density required to go head-to-head with conventional car with a full tank of petroleum.

Although petroleum has one hundred times more potential energy than a super-battery, that energy is difficult to release all at once. This is because the fuel requires three times its weight in oxygen to combust and there generally isn't that much oxygen around.  That's the reason conventional cars seldom explode, although there are tens of thousands of crashes every year.  It's actually quite difficult for movie makers to make cars explode. To get a nice explosion in the movies, the fuel is usually atomised by a real explosive because, in real life, unless atomised by the crash, there's generally not enough oxygen close-by to sustain more than a relatively unimpressive fire. 

On the other hand, batteries contain all the chemicals required to release their stored energy.  They're chemically self-contained and if shorted or become unstable in a fire, like TNT, they can release their stored energy almost instantaneously.  At the moment the Tesla battery has about the same energy as 75 kg of TNT split into over seven thousand little cells.  Quadrupling this stored energy, say to get to Brisbane on one charge, would add an extra punch to every cell and put the battery up there with explosive potential of a 500 lb bomb. This is not just a Tesla problem.  Any battery capable of this level of energy density, approaching that of petroleum, will have this problem.

Despite recent failures, an attractive feature of Li-ion technology, compared to other very high energy batteries, is its relative safety.

Tesla now manufactures stationary energy storage systems for off-grid solar.  These significantly reduce the risks, compared to an automotive accident or a mobile phone, but they are often much larger.  It's not entirely clear what might happen in the case of a building fire or collapse or flooding - presumably Tesla have engineered the units with a worst case scenario in mind, as the larger units have the energy storage of a very large bomb indeed.

It's tempting to think that with Li-ion technology we have found the Holy Grail of batteries - all we have to do is get the price down - and mass production is the answer.   But the batteries still fall well short of our ideal, as outlined above particularly in terms of cycle life, efficiency (energy lost to heat) and cost.

Here are some features of present generation of, advanced, high energy density, batteries: 

Nickel metal-hydride (NiMH)
Energy density
Specific power
Charge/discharge efficiency
Self-discharge rate
Low self-discharge types:
Cycle durability

140–300 Wh/L
250–1,000 W/kg
13.9–70.6% (per month)
1.3–2.9% (per month) at 20 °C
180–2000 cycles
Energy density
Specific power
Charge/discharge efficiency
Self-discharge rate

Cycle durability

250–676 Wh/L
~250-~340 W/kg
8% (per month) at 21 °C

400–1200 cycles

Source: Wikipedia: NiMH - Lithium-ion 
Note in particular the cycle durability.  Longer battery life is one reason that Toyota uses NiMH cells in it's hybrid vehicles. 
Others are higher intrinsic safety and greater specific power.


Cost remains the greatest issue of all.  For example if Tesla can halve the price of their batteries then their cars will cost up to 30% less.

This is why Tesla has invested billions building a 'Gigafactory' in Nevada at which partner Panasonic will produce a new generation of lithium-ion cells and aim to reach a capacity of 35 GW in 2018.

In August 2016 Elon Musk, Tesla's founder, predicted that the Tesla Gigafactory could reach US$100 per KWh by 2020, beating industry projections by about five years. “We don’t think anyone is on a path to be even close to us” said Musk. But Tesla/Panasonic is not the only player. China’s BYD is reported to be neck and neck in the race along with South Korea’s LG Chem, that has plans to produce 50GW of cells by 2020. As a result of this competition battery prices were reported to now be around US$150 per KWh in mid 2017 (around A$200 million per GWh).


Mega Battery for South Australia

Back in March 2017, with his characteristic hyperbole, Billionaire space explorer Elon Musk told South Australian Premier Jay Weatherill that his Tesla battery company could solve South Australia’s energy crisis within 100 days of the State signing up for a Tesla Battery.

Like the fabled mayor of Hamelin, political populist Jay Weatherill, desperate to save face after leading the State to the energy abyss, leapt at the offer. All his energy problems were solved - just contract them out to this new, charismatic Rattenfänger.

But it turned out that, like the Pied Piper of Hamelin, Elon Musk, had an agenda of his own: the plummeting share price was alarming Tesla backers at home. Here was a publicity goldmine 'Tesla saves State'. 

His touted solution to the State's woes turned out to be just one 100 MW/129 MWh Tesla Powerpack system, yet three times the size of any built ever before - a world first. 

Let's put that into context. 

Elsewhere on this website South Australia's energy problem of intermittent supply mismatched to variable hourly, daily and annual electricity demand are discussed at length.  Suffice it to say that something in excess of 5% of mean demand is required to avoid blackouts during periods of peak load when the wind drops.  Even in little South Australia with just 5% of Australia's electricity generation this is equivalent to about 100 GWh.  That's right, one hundred thousand MWh. 

Thus the promise to fix to the 'energy crisis' is hollow. 129MWh is equivalent to just 1% of the average daily generation of the State's wind farms. Even taking a generous view it's about a tenth of that required to have a real impact on the 'South Australian energy crisis'. 

But to Premier Jay the publicity cost was affordable.

Elon had promised that a 100MW of Tesla Powerpack would cost just $33.2 million. Presumably US dollars.  Shipping, taxes and installation costs would be extra. Little more than an extra bed at Royal Adelaide Hospital (Australia's most expensive building).

So in July 2017 Jay and Elon sang a duet to the Piper's Zauberflöte.  Contracts had been signed the clock was ticking: 100MW would be installed in 100 days or Elon would do it for free. 

To the media brave Sir Elon said he was taking a risk: if he failed he'd be a least $50 m - probably 'quite a bit more' - out of pocket. "So just what is the price the Premier has agreed to? And how long will the battery last?" asked a little boy in the crowd.

But the press ignored him and applauded: brave Sir Elon; and sagacious and bold Sir Jay.


As ever, the elephant in the room remains cost.  The cost of battery storage, to smooth out wind fluctuations in South Australia, even at Tesla's projected price drop to A$200 million per GW, would be at least half a billion dollars.  And if these batteries were discharged several times a day to cover drops in the wind they would soon need replacing.  With recharging and discharge several times a day and a projected life of 2,000 cycles the batteries would only last a few years, probably less, like your mobile phone or car battery.  All of these costs end up either on the consumer's electricity bill or in reduced Government services elsewhere such as education and health.


Battery investment


In other contexts, like PV solar, batteries are a partial answer (see above).  But although great strides have been made in battery technology costs are still, at least, one order of magnitude too high.  Energy losses also remain a significant factor, as high energy batteries lose up to 20% of the energy stored as heat and, more gradually, most of their stored energy by leakage over a year.  



As we have seen, with repeated heavy use few batteries retain their storage capacity for more than five years. Super-capacitors store electricity as charge without a chemical conversion.  Thus they have lives of many decades and can be repeatedly charged and discharged.  But their energy density is still less than a battery so they presently cost more.  Further, unlike a battery, a capacitor's voltage falls more or less linearly as they discharge so they need additional electronics to compensate for this; adding to cost and degrading their intrinsic efficiency.  

A possibility I once considered (and now publicly declare as the likelihood of patenting the idea is now nil) is that a capacitive layer could be incorporated in future vapour-deposited thin film PV solar panels.  Such an innovation could extent their output during periods of darkness and to meet demand peaks thus reducing dependence on batteries for energy smoothing. 

There are many applications in which their advantages, like long life, outweigh the higher cost over a battery but it is unlikely capacitors will entirely replace batteries for large scale energy storage any time soon. 


Other solutions

The Australian Federal Government is pinning its hopes on pump storage.

At the moment the only commercial large scale (terawatt) method for storing energy is pump-storage, associated with hydroelectric schemes.  The best of these lose over 30% the energy in pumping water up hill and then letting it run back through the turbines, an added cost.  Pump storage is primarily used for providing extra generation when consumer demand is high; not for smoothing wildly fluctuating generation from wind or solar farms. 

In Australia present hydro-generation is far too small and unresponsive to compliment a large-scale contribution of renewable energy.  The entire capacity of the Snowy Mountains Hydroelectric Scheme is only 7.8GW. Pump storage is a tiny fraction of this but an increase is within reach of complementing the presently small contribution of wind generation, albeit at a cost to consumers or taxpayers.


Mega Battery for South Australia - cont

From his bunker Federal Energy Minister, master Josh Frydenberg, previously ambushed and 'shirt fronted' by bold Sir Jay,  responded cautiously that he welcomed the announcement of the delivery of the 'world's largest' lithium-ion battery to help secure South Australia's power grid, but humbly proffered that it should be put in perspective: "as it will not solve all the state's energy problems".  

Was he implying that 129MWh is a drop in a very big bucket when he proposed a watery solution? 

A pumped hydro storage facility at Cultana on the Eyre Peninsula could properly protect South Australia from power shortages that lead to load-shedding blackouts, he suggested,  as he announced that work is underway to make such a facility a reality.

"The Cultana defence site has pipelines, transmission lines and roads connected to it... It might only take a couple of years to complete," he assured South Australians.

He went on to point out that: "97%  of {world} energy storage was in pumped hydro.  "It’s been underdone in Australia,” he said: “We have now tasked the Australian Renewable Energy Agency and the Clean Energy Finance Corporation in a new funding round for large-scale storage, including pumped hydro.”

ANU Professor Andrew Blakers (Engineering) supported the Minister's proposal. 

"The possibilities are almost unlimited," Prof Blakers is reported as telling the Adelaide Advertiser (or was it a press release?): "because you can build as many facilities as you like... We’re looking for a decent volume, and a big height differential from the upper to the lower.  Ideally 400 to 500 metres," the good Prof had apparently enthused.

"You would look typically at 300 MW and a 10-hectare reservoir... If you want more, you just make more - four or five or six.”

"This form of hydro doesn’t need a river. It works by pumping water from a lower reservoir to a higher one when energy is cheap, then letting the water run down again through a turbine when it’s expensive... A standard model would cost up to $500 million, but would last 50 years and be able to generate 300 megawatts."

Meanwhile, master Josh reminded us, that he and the Prime Minister had already announced a $2 billion expansion of the Snowy Mountains hydro scheme to address energy security: "...preventing power shortages in eastern states... The first major expansion of Snowy Hydro scheme since construction completed in 1974."

Forestalling in green objections, PM Malcolm Turnbull announced that: "Snowy Mountains Scheme 2.0 will involve building new tunnels and power stations but no new dams will be built".

Yet no sooner had the announcement been made than an environmental commentator is reported as proclaiming: "There are concerns about the location of the scheme, the Snowy Mountains is one of the most fragile alpine environments in Australia... So the detail of how those environmental impacts are managed are (sic) important."


Yet apart from environmental concerns the elephant in the room is again cost; and its a very big elephant.  In March 2017 the ABC reported (The World Today 16 Mar 2017) Max Talbot, the former executive officer of Strategic Engineering at the Snowy Hydro Scheme, telling a reporter  "We did look at that prospect briefly, expanding the scheme goes back nearly 20 years ago... that {it} was considered a feasible but far too expensive at the time."

If we use Prof Andrew Blakers numbers, in the box above, pumped hydro would have an upfront cost of three to five times that of batteries. But, as he suggests, it would be largely trouble free, using well proven hydro generation technology, and last for in excess of 50 years, as opposed to batteries which, very optimistically, even if improved, would last for a tenth of that time. 

Maybe the price equation has changed but again, the Snowy, even with a modest expansion, is far too small to secure energy security if we persist in an over-reliance on wind energy to replace existing coal fired electricity generation.  Pump hydro may well help to bail South Australia out of trouble but we would need several Snowy Schemes to do the same for the larger states.

There are lots of other proposals for storing energy.

Other methods like heat storage in molten salt or hydrogen storage are costly and lose too much energy (30% to 70%) in storage and/or in the recovery to electricity.

There is a discussion of the Spanish experience using hot salt for storage, in the article on Spain.

My brother is an advocate of mechanically lifting weights.  Others suggest pressurising gas to drive water through a turbine, for example in underwater bags.  But in each case, capital cost and conversion efficiency remain significant hurdles.

As you can see from the energy market table, a truly low cost electricity storage solution could be a goldmine for the inventor.  In the mean time, there is no cost effective alternative to sufficient base-load generation capacity.  If not fossil fuelled then provided by clean, comparatively very safe, relatively inexpensive, nuclear fission. 

Despite the Australian naysayers, and fear mongering stemming from the 2011 Tsunami in Japan, these technical and commercial qualities are demonstrated by the decision by many countries to continue to build new nuclear power stations.  In 2017 there are 60 new nuclear power reactors under construction, in 15 countries.  These will join around 440 operating reactors currently providing base-load electricity in 31 countries, including Japan.  For more information see our visit to France on this website.



Add comment

Security code

    Have you read this???     -  this content changes with each opening of a menu item





In June 2013 we visited Russia.  Before that we had a couple of weeks in the UK while our frequent travel companions Craig and Sonia, together with Sonia's two Russian speaking cousins and their partners and two other couples, travelled from Beijing by the trans Siberian railway.  We all met up in Moscow and a day later joined our cruise ship.  The tour provided another three guided days in Moscow before setting off for a cruise along the Volga-Baltic Waterway to St Petersburg; through some 19 locks and across some very impressive lakes.

Read more ...

Fiction, Recollections & News

A Secret Agent

A crime fiction...

Chapter 1



 - news flash -

Body in River



The body of a man was found floating in the Iguazú river this morning by a tourist boat.  Mary (name withheld) said it was terrible. "We were just approaching the falls when the body appeared bobbing in the foam directly in front of us.  We almost ran over it.  The driver swerved and circled back and the crew pulled him in. The poor man must have fallen - or perhaps he jumped?"

The body was discovered near the Brazilian side but was taken back to Argentina. Police are investigating and have not yet released details of the man's identity...


Iguazú Herald


Everywhere we look there is falling water. Down the track to the right is a lookout to the other side of the gorge, in Brazil, where the cliff faces are covered by maybe a kilometre of falling curtains in white windswept water. Here and there the curtains hang in gaps or are pushed aside by clumps of trees and bushes, like stagehands peeking out into a theatre before the performance.  

Read more ...

Opinions and Philosophy

Australia's carbon tax



Well, the Gillard government has done it; they have announced the long awaited price on carbon.  But this time it's not the highly compromised CPRS previously announced by Kevin Rudd.  

Accusations of lying and broken promises aside, the problem of using a tax rather than the earlier proposed cap-and-trade mechanism is devising a means by which the revenue raised will be returned to stimulate investment in new non-carbon based energy. 

Read more ...

Terms of Use                                           Copyright